![]() Rebuilding - The drive is being rebuilt.Individual Drives or JBOD (Individual Drives).The WD Drive Utilities software provides a status indication of the device configuration.ĭepending on the model of the selected device, the Status display shows current configuration as either: JBOD (individual drives) that can be formatted differently for enhanced flexibility.A mirrored RAID 1 disk array for maximum-protection/reduced-storage performance.You can use the WD Drive Utilities™ software to check the device status and reconfigure the device as either: The initial/default configuration of RAID-enabled WD dual-drive storage devices is as a striped RAID 0 disk array for high-speed/maximum-storage performance. If you want to run drive diagnostics and status checks on another drive, just select the drive and the test you want to run. ![]() It is not necessary to wait for the drive test to complete. On the Diagnostics dialog, click the button for the test to run:.Click Diagnose to display the diagnostics dialog.It checks every sector for error conditions, and inserts bad sector markers as required Complete drive test: The most comprehensive drive diagnostic is the complete drive test.The result of a quick drive test is a pass or fail evaluation of the drive's condition The quick drive test checks the drive for major performance problems. Quick drive test: Your supported drive has a built-in diagnostic utility that tests the drive for error conditions. ![]() The result of a drive status check is a pass or fail evaluation of the drive's condition With advanced warning, you could take precautionary measures, like moving your data to another drive, before a failure occurs. A detected increase in drive temperature, noise, or read/write errors, for example, can provide an indication that the drive is approaching a serious failure condition.
0 Comments
Leave a Reply. |